Pyrehead Pyrehead

PyreStorm trade port: concept art, sea gates for ships, and sailing plans

By LongBeam · Published · 8 min read · Updated today · From the stream of

PyreStorm trade port: concept art, sea gates for ships, and sailing plans

TL;DR

On September 27, PyreStorm's lead developer Greg ran his first development stream in a long time and spent three and a half hours blocking out the game's main trade port in Unreal Engine. He showed the concept the port is based on, explained how ships will enter through a pair of sea gates, sized the walls against a ship model, and answered questions on sailing, the project's size and whether the team uses AI.

Key moments

  1. 17:28 Port concept art and layout walkthrough
  2. 21:27 Sea gates for ships and the walls built around the mountains
  3. 24:34 Gates, roads and the second line of defences drawn on the concept
  4. 40:40 Project size: developer, server and client build
  5. 1:29:27 Sizing the outer wall against a ship model
  6. 1:45:31 Developer explains the team does not use AI to build the game
  7. 2:42:34 Sailing and multiple continents
  8. 3:26:03 Final walkthrough: sail in through two gates to the docks
On this page
  1. Quick answer
  2. The concept: a walled harbour inside the mountains
  3. Sea gates, docks and how you get into the port
  4. Building the outer wall at ship scale
  5. Sailing and the wider world
  6. The developer's stance on AI
  7. Project size and other details from the stream
  8. Conclusion

Quick answer

The trade port is a walled harbour built into the mountains, entered by ship through two sea gates, with docks, stores and markets inside and a village behind a second wall. Sailing is planned for later, and the developer says the game’s world is not made with AI.

What Answer
Port area size About 5 by 6 km for the concept; the landscape tile is roughly 10 by 10 km
How ships get in Through two large sea gates in the outer wall
Sailing Planned, added later on; multiple continents are planned
Does PyreStorm use AI for the game? No — only for concept images and drafting announcements, per the developer
Next stream topic Possibly the dungeon

The concept: a walled harbour inside the mountains

Greg opened by showing the concept art the port is based on: a ring-shaped harbour behind a fortified wall, set in a mountain valley, with a dense medieval town spreading out behind it.

The port concept shown on stream: a walled ring harbour in a mountain valley with the town behind it (AI-generated reference, per the developer)

The port concept shown on stream: a walled ring harbour in a mountain valley with the town behind it (AI-generated reference, per the developer)

Later in the stream he said this image was generated with AI as a reference, and that he is recreating it in his own way rather than copying it. The changes he described: instead of a perfectly round harbour, the walls will be built around the actual mountains, in a more octagonal medieval shape. The houses will sit on the back side, with a couple of cathedrals and a town square further down, and a longer section on one side behind another wall. Walkways will run on the inside of the walls, so the wall also holds part of the mountainside up.

He put the concept at about five by six kilometres from edge to end, and said everything is meant to tie into the game’s story.

Port layout from the concept walkthrough

Element Plan Heard at
Shape Built around the mountains, octagon-style medieval wall rather than a full circle 00:22:31
Town Houses at the back, a couple of cathedrals, a town square 00:17:42
Walkways Inside the walls; the wall supports the mountainside 00:24:25
Size About 5 × 6 km 00:18:02
How big is the PyreStorm trade port?

The developer described the port concept as roughly five by six kilometres from edge to end. The landscape tile he built it on is a little under 10 by 10 km.

Sea gates, docks and how you get into the port

The front of the harbour gets what Greg called a double gate for ships to pass through — “since we are gonna be having sailing, we kind of need that.” At the end of the stream he summed up the route: you sail in, pass through two doors, and enter the main harbour.

Inside, docks branch out on one side, and the dock arms are being extended and thinned out compared with the concept because the ships will be big. Stores and material sellers line the harbour. He talked about something like six to eight docks on one side and nine or ten on the other, with markets between them, though he presented those numbers as a rough idea.

Behind the harbour, an inner wall has three gates, so a player arriving on a mount from either side, or one who parks a ship in the centre, can run straight in. Roads with cross-sections lead back to another wall connected to the mountains, with gates on each side and in the centre — what he called a second line of defences — and a village beyond it.

Top-down view of the harbour basin, its walls and the gaps for the sea gates

Top-down view of the harbour basin, its walls and the gaps for the sea gates

From sea to town

Step What is there Heard at
Outer wall Two sea gates large enough for big ships 03:26:03
Harbour Docks, stores and materials, markets between docks 03:26:34
Inner wall Three gates for players on foot or mounted 00:26:10
Second wall Gates on both sides and centre, village behind 00:27:31
How do ships enter the PyreStorm port?

Through two large sea gates in the outer wall. The developer described sailing in, passing through two doors, and reaching the docks in the main harbour.

Building the outer wall at ship scale

Most of the hands-on time went into the exterior wall. Greg said the main wall where ships pass needs to be massive to give the right feeling, and he used a ship model to check scale — first against a test wall section, then on the water once the harbour basin was flooded.

Checking the height of the outer wall against a ship model

Checking the height of the outer wall against a ship model

He asked chat whether the wall looked high enough once the water level is taken into account, widened the gap so there is more room to get through, and dressed the base with large boulders. The water was set up with the Fluid Flux coastline system, which he said he had not used before.

A ship in the flooded harbour basin beside the new sea wall

A ship in the flooded harbour basin beside the new sea wall

He was also clear that he is placing this by hand on purpose. Asked why he does not build a wall tool, he said he could make an asset or a procedural setup to do it, but prefers doing it manually to show the dedication he has to the project. By the end of the stream he noted that three and a half hours had gone into getting this far.

Are PyreStorm’s ships big?

Yes. The developer said the ships will be quite big, which is why the docks are being extended and the sea wall and gates are being sized against a ship model.

Sailing and the wider world

When another developer in chat described their own game’s boats, Greg answered for PyreStorm: “we’re going to be having multiple continents” and “we’re going to have sailing added later on.” He did not give a timeline for sailing, and it was not clear from the stream whether it is planned for launch or after it.

This matches what the port is being built around: sea gates, docks sized for large ships and a harbour basin big enough to manoeuvre in.

Will PyreStorm have sailing?

Yes, according to the developer: sailing is planned and will be added later on. No date was given.

Does PyreStorm have more than one continent?

The developer said the game is planned to have multiple continents.

The developer’s stance on AI

Someone in chat raised AI, and Greg was direct: “we’re not using AI, we refuse to use AI.” He said the world-building and animations take so long precisely because the team does them properly, and that he pays people to do that work.

He listed the three things he does use it for: concept images to show people what he is planning (the port concept above is one), help with write-ups such as Discord, Twitch and Instagram announcements, which he then edits to sound like himself, and cooking recipes. Everything else, he said, he does himself — while placing rocks by hand on stream as he said it.

Does PyreStorm use AI?

The developer says the game itself is not made with AI. He uses it only for concept images, drafting announcements that he then edits, and personal things like recipes.

Project size and other details from the stream

A few other numbers came up while the level was loading. On Greg’s development machine the project is about 340 GB. The server-side Unreal project is around 412 GB, plus roughly 80 GB on the Visual Studio side that handles connectivity. For comparison, he said the client build from their test was 8.6 GB.

He also mentioned that game development is not his main profession — he is a heavy equipment operator by trade and still learning — and that he plans to stream more often. The next stream might focus on the dungeon. For everything else, he pointed viewers to the official Discord and pyrestorm.com.

Project size as stated on stream

Part Size Heard at
Developer-side project About 340 GB 00:40:40
Server-side Unreal project About 412 GB 00:40:52
Visual Studio / connectivity About 80 GB 00:40:59
Client build from the test 8.6 GB 00:41:08
How big is the PyreStorm client download?

The developer said the client build from their test was 8.6 GB. The final download size has not been announced.

Conclusion

The September 27 stream turned the trade port from a concept image into a blocked-out level: a harbour cut into the mountains, sea gates and docks sized for large ships, and a layered set of walls leading back to the town. Combined with the plan for sailing and multiple continents, it shows the port as a hub for travel by sea — with the developer insisting it is all being built by hand.

  • PyreStorm trade port
  • PyreStorm sailing
  • PyreStorm ships
  • PyreStorm AI policy
  • PyreStorm map size
  • PyreStorm development stream